Ganzhou Blister packaging manufacturer stay There are two main points to pay attention to when making plastic tray: one is quality, the other is appearance (surface treatment). The manufacturers who can do these two things will not be too bad. If it is to make plastic blister trays for auto parts, it must have high quality requirements. Considering that most customers who buy auto parts are relatively rough, and our products need to be well protected, the plastic blister trays can play a protective role if they pass the quality standards.

Punch processing: the large layout products formed by blister must be divided into a single product with a knife plate by a punch. The principle is that there is a large piece of plastic cutting board on the bottom platform of the punch, the large plate shaped product is placed on the cutting board, and the pre made cutter die is stuck on a single product. Through the up and down movement of the punch, a single finished product is cut. However, the disadvantage of this cutting method is that the cutting board and cutter die are relatively easy to be damaged, resulting in unsmooth cutting edges and edges, For bubble shells with high quality requirements, a male die, a female die and a cold punching machine are required for processing.

The blister tray model has an self-evident effect on the product. If the blister tray is not well done, the sales of the product will also be affected. The blister tray can completely and intuitively express the selling points of the product. It makes the product look more high-quality, and it is also important for product protection. Would you continue to buy if the appearance of a product you like is seriously damaged?

Blister proofing: After the customer approves the computer design draft, the production scheduling will decide which method to use to develop the mold (plaster mold, copper mold, aluminum mold) according to the complexity of the Blister product, with a development cycle of 3-5 days. The majority of blister proofing is gypsum mold proofing, and the operation steps are as follows:

1. First, paste the real object with hand clay to form the contour,

2. Put it on the blister plate printer to form blister shell hair germ;

3. Pour the prepared blister gypsum into the blister hair germ, and form the gypsum hair germ after air drying;

4. Electric milling machine is used to deeply process gypsum germ and regular shape;

5. Manual grinding and manual addition of parts;

6. Glue each polished stone height part into a complete plaster mold;

7. Then put the complete sample into the blister plate printer;

8. According to the size of the finished product, manually cut and seal the edges to complete the entire proofing process. If necessary, the printing proof department will also make paper cards, stickers or color boxes used for blister samples together, and they will reflect the actual printing results with the help of the full open printing digital proof function.