From the perspective of the blister forming process of the blister disk, the finished products made of PET, PS and PVC blister disks are not very different. The obvious difference lies in the cost of raw materials. PET costs are obviously high, and most enterprise customers dare not use PET, Blister packaging manufactor We have to use other raw materials instead. Only a few black heart factories still use recycled materials, but the cost of raw materials is only a part of the total cost of the product, depending on the processing difficulty, order quantity, production efficiency and other factors.

Blister packaging industry is a new plastic processing industry, and there is no technical standard, so there is no general standard to measure whether the products are qualified. According to the convention, the large sample provided to the customer shall prevail. If it is different from the sample in terms of aesthetics and functions, the aesthetics will become worse, such as transparency, surface smoothness, flatness and cleanliness; Functionally unable to meet the requirements, such as hardness, loose or small acupoints, are defined as unqualified blister products.

How to use correctly Electronic plastic tray ：

1. Electronic plastic tray shall be protected from sunlight to avoid plastic aging and shorten service life.

2. It is strictly prohibited to throw goods into the pallet from a high place. Reasonably determine the stacking mode of goods in pallets. Goods shall be placed evenly, not centrally, but eccentrically. The tray carrying heavy objects shall be placed on a flat ground or object surface.

3. It is strictly prohibited to drop the plastic tray from a high place to avoid crushing and cracking of the tray due to violent impact.

4. When using a forklift or a manual hydraulic truck for operation, the prongs should lean as far as possible to the outside of the fork holes of the electronic plastic tray. The prongs should all extend into the tray. The angle can be changed only after the tray is lifted steadily. Fork thorns shall not hit the side of the tray to avoid breakage and crack of the tray.

5. When electronic plastic tray is put on the shelf, shelf type tray shall be used. The bearing capacity shall be determined according to the structure of the shelf, and overload is strictly prohibited.

6. The plastic tray should be used in a dry environment.