Wananhou blister tray customization
Molding area and product area of blister packaging manufacturers. Forming area and product area: the forming area refers to the range of length and width inside the clamping frame; Product area refers to the area where traction stretching occurs during molding, which mainly depends on the size of blister products. In the heating process, the stretching part needs to be heated, and the stretching range is large. For the non product area with less heating amount, the stretching amount is also small. It should be noted that uneven heating will also cause uneven shrinkage after molding cooling and deformation of blister products.
Wananhou blister tray customization
There are two points in the design of electronic blister packaging tray for medical blister packaging box: on the one hand, science and technology should serve the design. The adoption of new scientific and technological achievements and new design methods can enhance the new image of packaged products, thus promoting the transformation of consumers' aesthetic views. On the other hand, in order to let consumers know the product at a glance, we use transparent materials when designing medical blister packaging boxes. More reflect the advantages of the product.
Wananhou blister tray customization
Antistatic plastic trays should be classified according to the anti-static index. The service life of anti-static plastic trays under different anti-static indexes is also different. In other words, the service life of anti-static plastic trays is related to its anti-static grade as well as its material. What are the performance requirements of medical blister materials for electronic blister packaging trays? 1. The packaging material of medical blister box shall be non-toxic and tasteless, without perforation, damage, tear, fold or partial uneven thickness. 2. The acceptable cleanliness, particle pollution and floc falling level of materials shall meet the standards. 3. The material shall be free of dissolved matter under specified conditions. 4. The material should have good biological barrier.
Wananhou blister tray customization
What are the prevention methods of blister static electricity for blister packaging box manufacturers? Reduce or reduce friction to reduce the generation of static electricity: the accumulation of electric charges reduces the friction speed and friction coefficient, although it can achieve this goal, it will inevitably lead to the decline of production, which is unrealistic; In addition, adding a medium (oil) with a large dielectric constant e into the contact surface gap of the friction object can also reduce the accumulation of charges. However, this method can only be used in certain situations, and has no universal significance.
Wananhou blister tray customization
After the blister packaging box is successfully printed, it basically has a good appearance. At this time, it is necessary to start punching the mold. The so-called stamping refers to the application of external force on the sheet by the pressure machine and mold to enable it to form, so as to achieve the desired shape and size of the workpiece. After stamping and forming, attention must be paid to the removal of leftovers from the finished product at the right point, because many times the surplus leftovers are still bonded with the finished product, which affects the beauty of the product.
Wananhou blister tray customization
Flocking sheet used for flocking blister packaging is a common PS material, which is characterized by a thin layer of fluff attached to the outer layer. If the adhesive is used to stick on it, it is very stable and not easy to fall off. In addition, people can choose the corresponding materials, colors, models and packaging according to the state of the product and one of their hobbies, which is more consistent with the current customized services. The current market use of flocking blister packaging is relatively easy to make and common, but because of its own characteristics, it is basically applied in a better market environment, wrapping some high-grade products, such as tobacco, wine, tea, precious metals, jade bracelets, gift products and other products. Therefore, they are picky about the application environment, that is, they cannot be used in a series of environments such as vegetable markets and factories.
