Liancheng Thick Blister Tray Manufacturer
Anti static plastic tray can be classified in various ways according to different classification performance, and can be divided into anti-static tray, conductive tray and parts anti-static tray according to use; According to the physical properties, it can also be divided into: anti-static tray (the 6th power of surface resistance 10 to the 9th power of 10), conductive tray (the 4th power of surface resistance 10 to the 6th power of 10); According to the structure, it can be divided into stackable anti-static tray, format anti-static tray, perforated anti-static tray, hollow plate anti-static tray, plastic suction anti-static tray.
Liancheng Thick Blister Tray Manufacturer
There are two ways for blister packaging manufacturers to produce anti-static blister trays, external spraying and internal coating. The internal coating is made of permanent anti-static dissipative properties by adding some polymer chains to the raw materials, and does not change with time, temperature and environment. It can dredge the accumulated electrostatic charges on the product surface, greatly reduce the damage rate in the production process of electronic products, reduce costs and improve quality and efficiency.
Liancheng Thick Blister Tray Manufacturer
On daily plastic containers, we can often see a triangle logo surrounded by arrows. There are numbers 1 to 7 inside the triangle and letters below it. Understanding the meaning of this logo is the prerequisite for selecting a safe packaging box. What are the reasons for the high quality requirements of electronic blister packaging pallet? In order to increase the service life of the electronic blister packaging tray, the blister tray has high anti-static performance, which can avoid many problems in the use process, extend the service life of the blister tray, and reduce our costs.
Liancheng Thick Blister Tray Manufacturer
What are the prevention methods of blister static electricity for blister packaging box manufacturers? 1. Improving the relative humidity of the environment for plastic processing and product use can prevent the accumulation of static electricity. It is only applicable to hydrophilic materials and has little effect on hydrophobic materials. 2. The method of using antistatic agent is simple, effective and often used. 3. Through graft copolymerization, the polymer in the main body of the plastic is carried with more ji groups or ionized groups, reducing resistance, increasing conductivity, reducing the generation of static electricity and the accumulation of electric charges. This method is troublesome, and will change the structure of the polymer, which will inevitably damage other properties. It is rarely used.
Liancheng Thick Blister Tray Manufacturer
The medical device packaging box is specially used to contain some medical products, and the hygiene requirements are very strict. The first standard to be reached is sterility. The materials used to produce packaging boxes should be non-toxic, sterile and stable, and there will be no reaction between them and the packaged products. In the process of production, further disinfection and sterilization shall be carried out, and the products shall be packaged by vacuum packaging or sealed packaging. Ensure the formation of a sealed sterile medical device packaging system.
Liancheng Thick Blister Tray Manufacturer
After the transparent plastic box is produced, the strength of the transparent plastic box material is tested. Only transparent plastic boxes with high strength and hardness can be favored by more manufacturers. At present, there are many plastic boxes in the market, whether it is pet plastic boxes or pvc plastic boxes. If the production process requirements are not strict, resulting in low strength, low hardness and other conditions of the product, it can be damaged at will, unable to play the role of protecting core products, and therefore cannot be put on the market.
