Zhuhai Food Blister Customization
Double folded blister shell packaging means that one side of the double blister shell is connected together during blister molding, and the bottom and surface of the double blister shell are formed after being folded in half. Its feature is that instead of using high-frequency edge banding process, the double blister shells can be connected by making up positions at certain positions of the blister shells, and staples can be made when necessary. In terms of material selection, PET hard chips can be used to achieve the purpose of environmental protection materials.
Zhuhai Food Blister Customization
The medical device packaging box is specially used to contain some medical products, and the hygiene requirements are very strict. The first standard to be reached is sterility. The materials used to produce packaging boxes should be non-toxic, sterile and stable, and there will be no reaction between them and the packaged products. In the process of production, further disinfection and sterilization shall be carried out, and the products shall be packaged by vacuum packaging or sealed packaging. Ensure the formation of a sealed sterile medical device packaging system.
Zhuhai Food Blister Customization
What are the performance advantages of electronic blister packaging tray? Strong environmental protection performance: plastic products can be recycled, and automotive electronic plastic trays are no exception. Plastic trays can be recycled and broken into particles after use. Most recycled materials continue to be put into use, which reduces the amount of industrial waste to a certain extent, and the corresponding waste treatment conforms to the advocated environmental protection concept.
Zhuhai Food Blister Customization
After the blister packaging box is successfully printed, it basically has a good appearance. At this time, it is necessary to start punching the mold. The so-called stamping refers to the application of external force on the sheet by the pressure machine and mold to enable it to form, so as to achieve the desired shape and size of the workpiece. After stamping and forming, attention must be paid to the removal of leftovers from the finished product at the right point, because many times the surplus leftovers are still bonded with the finished product, which affects the beauty of the product.
Zhuhai Food Blister Customization
After determining the corresponding product quantity, determine the required product raw materials according to the corresponding quantity. After determining the pvc raw materials, you can start to enter the production process. After the raw materials arrive, prepare the film covering and cutting materials. Because the raw materials just entered are actually roll models, we want to produce them first for slicing. The so-called lamination is to keep the plastic box from being damaged and increase the beauty of the plastic box during subsequent production.
Zhuhai Food Blister Customization
Electronic blister packaging tray food blister box manufacturing enterprises generally use an integrated molding machine, which adopts the molding method of low temperature and high speed upper and lower mold. Large output and high efficiency are its advantages, but the medical industry products are generally of many varieties and few quantities. Although the one-piece molding machine feels that the shell is hard, its physical properties (such as anti drop) are relatively poor and prone to stress deformation.
