Ji'an electronic plastic tray processing
What are the prevention methods of blister static electricity for blister packaging box manufacturers? Reduce or reduce friction to reduce the generation of static electricity: the accumulation of electric charges reduces the friction speed and friction coefficient, although it can achieve this goal, it will inevitably lead to the decline of production, which is unrealistic; In addition, adding a medium (oil) with a large dielectric constant e into the contact surface gap of the friction object can also reduce the accumulation of charges. However, this method can only be used in certain situations, and has no universal significance.
Ji'an electronic plastic tray processing
The following points should be paid attention to when designing packaging boxes: first, the relationship between color and packaging materials; The second is the contrast between color and color itself. These two points are the key points in the use of color. The purpose of the packaging box is not only practical, but also beautiful, mainly through the external packaging color to reveal or reflect the internal packaging. People can basically perceive or associate what the inner packaging is when they look at the outer packaging.
Ji'an electronic plastic tray processing
For the finished box, the adhesive shall be used to tear the film at the place. In order to ensure the practicability of the transparent plastic box after the next step of gluing, the excess film at the adhesive shall be removed. Glue is applied only after it is confirmed that there is no problem. Normally, this step is also a machine operation, but it is inevitable that some small workshops apply glue manually. The disadvantage of manual work is that the amount is small and the efficiency is low. The above is the production process of a transparent plastic box.
Ji'an electronic plastic tray processing
Molding area and product area of blister packaging manufacturers. Forming area and product area: the forming area refers to the range of length and width inside the clamping frame; Product area refers to the area where traction stretching occurs during molding, which mainly depends on the size of blister products. In the heating process, the stretching part needs to be heated, and the stretching range is large. For the non product area with less heating amount, the stretching amount is also small. It should be noted that uneven heating will also cause uneven shrinkage after molding cooling and deformation of blister products.
