Tibet thick blister tray processing
In the anti-static plastic tray, the conductive plastic tray has a long service life, which is 1-3 years under normal use. Its anti-static value will not be affected by the environment, air, temperature and humidity, so it is called permanent anti-static plastic tray; The normal use time of the semi conductive plastic tray is half a year to one year, and the anti-static value is lower than that of the conductive plastic tray. The anti-static plastic tray is affected by the external environment and other factors, and the service time is generally only 3-6 months, and the life of the affected tray will be shortened.
Tibet thick blister tray processing
There are two ways for blister packaging manufacturers to produce anti-static blister trays, external spraying and internal coating. The internal coating is made of permanent anti-static dissipative properties by adding some polymer chains to the raw materials, and does not change with time, temperature and environment. It can dredge the accumulated electrostatic charges on the product surface, greatly reduce the damage rate in the production process of electronic products, reduce costs and improve quality and efficiency.
Tibet thick blister tray processing
For the finished box, the adhesive shall be used to tear the film at the place. In order to ensure the practicability of the transparent plastic box after the next step of gluing, the excess film at the adhesive shall be removed. Glue is applied only after it is confirmed that there is no problem. Normally, this step is also a machine operation, but it is inevitable that some small workshops apply glue manually. The disadvantage of manual work is that the amount is small and the efficiency is low. The above is the production process of a transparent plastic box.
Tibet thick blister tray processing
With the progress of the times, the development of blister packaging plants is moving forward, and people's appreciation of beauty is also constantly improving. Different times reflect different aesthetic characteristics. However, the design of medical blister packaging box is lack of creativity for a long time. Simple design should not only be a process of urbanization, but also create a variety of packaging design forms to reflect the connotation of packaging design.
