Nanxiong Thick Blister Tray Manufacturer
On daily plastic containers, we can often see a triangle logo surrounded by arrows. There are numbers 1 to 7 inside the triangle and letters below it. Understanding the meaning of this logo is the prerequisite for selecting a safe packaging box. What are the reasons for the high quality requirements of electronic blister packaging pallet? In order to increase the service life of the electronic blister packaging tray, the blister tray has high anti-static performance, which can avoid many problems in the use process, extend the service life of the blister tray, and reduce our costs.
Nanxiong Thick Blister Tray Manufacturer
For the finished box, the adhesive shall be used to tear the film at the place. In order to ensure the practicability of the transparent plastic box after the next step of gluing, the excess film at the adhesive shall be removed. Glue is applied only after it is confirmed that there is no problem. Normally, this step is also a machine operation, but it is inevitable that some small workshops apply glue manually. The disadvantage of manual work is that the amount is small and the efficiency is low. The above is the production process of a transparent plastic box.
Nanxiong Thick Blister Tray Manufacturer
There are two points in the design of electronic blister packaging tray for medical blister packaging box: on the one hand, science and technology should serve the design. The adoption of new scientific and technological achievements and new design methods can enhance the new image of packaged products, thus promoting the transformation of consumers' aesthetic views. On the other hand, in order to let consumers know the product at a glance, we use transparent materials when designing medical blister packaging boxes. More reflect the advantages of the product.
Nanxiong Thick Blister Tray Manufacturer
Card inserting packaging refers to the packaging form in which the paper card is inserted together with the transparent blister shell that has been folded over three sides. It is characterized by that no packaging equipment is required for packaging, and only workers need to place the product, blister shell and paper card in place. Attention should be paid to the following problems: 1. The size of the paper card and the folded blister shell is appropriate, and if they are inserted too tightly together, the paper card and the blister shell will be deformed; If it is too loose, it will be easy to disengage. 2. When the product is too heavy, it is necessary to consider using staples at certain positions.
Nanxiong Thick Blister Tray Manufacturer
Molding area and product area of blister packaging manufacturers. Forming area and product area: the forming area refers to the range of length and width inside the clamping frame; Product area refers to the area where traction stretching occurs during molding, which mainly depends on the size of blister products. In the heating process, the stretching part needs to be heated, and the stretching range is large. For the non product area with less heating amount, the stretching amount is also small. It should be noted that uneven heating will also cause uneven shrinkage after molding cooling and deformation of blister products.
