Yancheng thick plastic tray processing
There are two ways for blister packaging manufacturers to produce anti-static blister trays, external spraying and internal coating. The internal coating is made of permanent anti-static dissipative properties by adding some polymer chains to the raw materials, and does not change with time, temperature and environment. It can dredge the accumulated electrostatic charges on the product surface, greatly reduce the damage rate in the production process of electronic products, reduce costs and improve quality and efficiency.
Yancheng thick plastic tray processing
After determining the corresponding product quantity, determine the required product raw materials according to the corresponding quantity. After determining the pvc raw materials, you can start to enter the production process. After the raw materials arrive, prepare the film covering and cutting materials. Because the raw materials just entered are actually roll models, we want to produce them first for slicing. The so-called lamination is to keep the plastic box from being damaged and increase the beauty of the plastic box during subsequent production.
Yancheng thick plastic tray processing
PP plastic for food can be made into any plastic package for food, such as plastic bag for food, plastic box for food, straw for food, etc. It is safe, non-toxic, and has good resistance to low temperature and high temperature. PP is a kind of plastic that can be put into the microwave oven for heating, and has high strength and folding resistance. It will not be damaged when falling from height for 50000 times at - 20 ℃. PP sheet for food is commonly used for quick freezing dumplings and microwave heating food packaging.
Yancheng thick plastic tray processing
After the transparent plastic box is produced, the strength of the transparent plastic box material is tested. Only transparent plastic boxes with high strength and hardness can be favored by more manufacturers. At present, there are many plastic boxes in the market, whether it is pet plastic boxes or pvc plastic boxes. If the production process requirements are not strict, resulting in low strength, low hardness and other conditions of the product, it can be damaged at will, unable to play the role of protecting core products, and therefore cannot be put on the market.
