Liaoning Food Blister Customization
The anti-static plastic packaging of Jiangxi blister packaging box manufacturers can be divided into four categories: PS, PP, PET and PVC. According to the processing method, the anti-static sheet can be divided into internal coating and external coating. PP and PS are internally applied, while PET and PVC are externally applied. In addition, it means that the antistatic or conductive raw material particles that have been added can be directly processed into blister sheets without adding antistatic liquid. External coating refers to coating a layer of anti-static liquid on the surface of the material during the production of blister sheet to achieve anti-static effect.
Liaoning Food Blister Customization
Electronic blister packaging tray food blister box manufacturing enterprises generally use an integrated molding machine, which adopts the molding method of low temperature and high speed upper and lower mold. Large output and high efficiency are its advantages, but the medical industry products are generally of many varieties and few quantities. Although the one-piece molding machine feels that the shell is hard, its physical properties (such as anti drop) are relatively poor and prone to stress deformation.
Liaoning Food Blister Customization
Molding area and product area of blister packaging manufacturers. Forming area and product area: the forming area refers to the range of length and width inside the clamping frame; Product area refers to the area where traction stretching occurs during molding, which mainly depends on the size of blister products. In the heating process, the stretching part needs to be heated, and the stretching range is large. For the non product area with less heating amount, the stretching amount is also small. It should be noted that uneven heating will also cause uneven shrinkage after molding cooling and deformation of blister products.
Liaoning Food Blister Customization
When the inquiry process of blister packaging is almost completed, the manufacturer needs to give the corresponding quotation according to the actual needs of customers, the model of blister products and the selected materials. If the purchaser has other requirements such as expediting for the production cycle of the product, it also needs to verify the quotation according to the corresponding requirements. The quotation should conform to the facts, and should not be overestimated or underpriced.
Liaoning Food Blister Customization
PP plastic for food can be made into any plastic package for food, such as plastic bag for food, plastic box for food, straw for food, etc. It is safe, non-toxic, and has good resistance to low temperature and high temperature. PP is a kind of plastic that can be put into the microwave oven for heating, and has high strength and folding resistance. It will not be damaged when falling from height for 50000 times at - 20 ℃. PP sheet for food is commonly used for quick freezing dumplings and microwave heating food packaging.
Liaoning Food Blister Customization
When the price is all right, both sides sign a contract agreement. The manufacturer starts to place an order, first designs the products that meet the customer's requirements through the computer of the blister mold, and then makes the corresponding product mold, after confirming that there is no problem with the product mold. Start to place an order to purchase raw materials and enter the production process, which is the production of blister packaging. The whole production process is basically mechanical production, stamping, improvement, etc. After removing the surplus leftovers of the product, color the product. After confirming that there is no problem with the product, you can make delivery to the purchaser.
